Sony Digital Camera SNC RX530P User Manual

3-286-973-11 (1)  
Before using a “Memory Stick”  
Features  
Rear  
DC IN 12 V/AC IN 24 V (power input) terminal  
Connect to a 12V DC or 24V AC power supply system.  
I/O (Input/Output) port  
Monitoring of a high-quality live image from the camera is possible. The  
maximum frame rate is 30 fps for SNC-RX570N/RX550N/RX530N and 25 fps for  
SNC-RX570P/RX550P/RX530P.  
Three video compression modes (video codecs) JPEG/MPEG4/H.264 are  
supported.  
Single codec mode and Dual codec mode are switchable.  
A high-speed (300° rotation/second) pan/tilt mechanism is equipped. This  
allows 360° endless panning and -90° to 0° tilting.  
Optical zoom of 36 magnifications (SNC-RX570N/P), 26 magnifications (SNC-  
RX550N/P) or 18 magnifications (SNC-RX530N/P), and digital zoom of 12  
magnifications are provided.  
Inserting the optional wireless card enables wireless transmission of camera  
images.  
Up to 16 preset positions and 5 tour programs can be saved.  
Intelligent object detection function is provided.  
Up to 20 users can view an image from the camera at the same time.  
Date/time can be superimposed on the image.  
Terminal  
Write-protect tab  
This port is provided with an RS-232C port, two sensor inputs and two  
alarm outputs.  
Network Camera  
Pin No. Pin name  
1
2
Sensor In 1 +  
Sensor In 1 – (GND)  
Sensor In 2 +  
Sensor In 2 – (GND)  
Alarm Out 1 +  
Alarm Out 1 –  
Alarm Out 2 +  
Alarm Out 2 –  
GND  
Labeling position  
Installation Manual  
Before operating the unit, please read this manual thoroughly and  
retain it for future reference.  
When you set the “Memory Stickwrite-protect tab to “LOCK,data cannot be  
recorded, edited, or erased.  
Data may be damaged if:  
You remove the “Memory Stickor turn off the unit while it is reading or  
writing data.  
You use the “Memory Stickin a location subject to the effects of static  
electricity or electric noise.  
3
4
5
6
7
8
Notes  
Notes on Use  
9
Do not attach any other material than the supplied label onto the label space.  
Attach the label so that it does not stick out beyond the labeling position.  
Carry and store the “Memory Stickin its case.  
Prevent metallic objects or your finger from coming into contact with the  
metal parts of the connecting section.  
Do not strike, bend, or drop the “Memory Stick.”  
Do not disassemble or modify the “Memory Stick.”  
Do not allow the “Memory Stickto get wet.  
Do not use or store the “Memory Stickin a location that is:  
extremely hot, such as in a car parked in the sun.  
under direct sunlight.  
10  
11  
12  
GND  
Data and security  
You should keep in mind that the images or audio you are monitoring may be  
protected by privacy and other legal rights, and the responsibility for making  
sure you are complying with applicable laws is yours alone.  
RS232C . RX  
RS232C . TX  
LAN (network) port (RJ45)  
Access to the images and audio is protected only by a user name and the  
password you set up. No further authentication is provided nor should you  
presume that any other protective filtering is done by the service. Since  
the service is Internet-based, there is a risk that the image or audio you are  
monitoring can be viewed or used by a third-party via the network.  
SONY IS NOT RESPONSIBLE, AND ASSUMES ABSOLUTELY NO LIABILITY TO YOU  
OR ANYONE ELSE, FOR SERVICE INTERRUPTIONS OR DISCONTINUATIONS OR  
EVEN SERVICE CANCELLATION. THE SERVICE IS PROVIDED AS-IS, AND SONY  
DISCLAIMS AND EXCLUDES ALL WARRANTIES, EXPRESS OR IMPLIED, WITH  
RESPECT TO THE SERVICE INCLUDING, BUT NOT LIMITED TO, ANY OR ALL  
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR  
PURPOSE, OR THAT IT WILL OPERATE ERROR-FREE OR CONTINUOUSLY.  
Security configuration is essential for wireless LAN. Should a problem  
occur without setting security, or due to the limitation of the wireless LAN  
specifications, SONY shall not be liable for any damage.  
Always make a test recording, and verify that it was recorded successfully.  
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT  
LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE  
OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR  
ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.  
Always verify that the unit is operating properly before use. SONY WILL NOT  
BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,  
COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT  
OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE  
WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY  
OTHER REASON WHATSOEVER.  
SNC-RX570N/RX570P  
SNC-RX550N/RX550P  
SNC-RX530N/RX530P  
Connect to the 10BASE-T or 100BASE-TX network using a network cable  
(UTP, category 5).  
  (video output) connector (BNC type)  
Outputs a composite video signal.  
  (line output) jack (minijack, monaural)  
very humid or subject to corrosive substances.  
Connect a commercially available speaker system with the built-in  
amplifier.  
  (microphone input) jack (minijack, monaural)  
Connect a commercially available microphone. This jack supports plug-  
in-power microphones (rated voltage: 2.5 V DC).  
Reset switch  
About the Supplied Manuals  
Installation Manual (this document)  
This Installation Manual describes the names and functions of parts and controls  
of the Network Camera, gives connection examples and explains how to set up  
the camera. Be sure to read the Installation Manual before operating.  
2007 Sony Corporation Printed in Japan  
To reset the camera to the factory default settings, supply the power to  
the camera, while holding down this switch with a pointed object.  
Owners Record  
The model and serial numbers are located on the bottom. Record these  
numbers in the spaces provided below.  
Refer to these numbers whenever you call upon your Sony dealer regarding  
this product.  
Users Guide (stored in the CD-ROM)  
The User’s Guide describes how to set up the camera and how to control the  
camera via a Web browser.  
After installing and connecting the camera correctly, operate referring to this  
User’s Guide.  
Bottom  
Ceiling bracket mounting screw holes  
When installing the camera on the ceiling, fix the supplied ceiling  
brackets to these holes.  
Screw hole for fall-prevention wire rope  
Model No.  
Serial No.  
Using the CD-ROM Manuals  
The supplied CD-ROM disc includes the User’s Guides for this unit (Japanese,  
English, French, German, Spanish, Italian and Chinese versions) in PDF format.  
When installing the camera on the ceiling, fix the supplied fall-prevention  
wire rope to this hole using the supplied screw M4×8.  
WARNING  
Preparations  
To reduce a risk of fire or electric shock, do not expose  
this product to rain or moisture.  
The Adobe Reader Version 6.0 or higher must be installed on your computer in  
order to use the User’s Guide stored in the CD-ROM disc.  
If you lose data by using this unit, SONY accepts no responsibility for  
restoration of the data.  
(continued on the reverse side)  
Note  
Operating or storage location  
Do not shoot an extremely bright object (an illumination, the sun, etc.). Also,  
avoid operating or storing the camera in the following locations, as these can be  
a cause of a malfunction.  
Extremely hot or cold places (Operating temperature: 0 °C to +50 °C [32 °F to  
122 °F])  
Exposed to direct sunlight for a long time, or close to heating equipment (e.g.,  
near heaters)  
To avoid electrical shock, do not open the cabinet. Refer  
servicing to qualified personnel only.  
If Adobe Reader is not installed, it may be downloaded from the following URL:  
WARNING  
Reading the manual in the CD-ROM  
1 Insert the CD-ROM in your CD-ROM drive.  
This installation should be made by a qualified service person and should  
conform to all local codes.  
A cover page appears automatically in your Web browser.  
If it does not appear automatically in the Web browser, double-click on the  
index.htm file on the CD-ROM.  
WARNING  
Close to sources of strong magnetism  
Close to sources of powerful electromagnetic radiation, such as radios or TV  
transmitters  
A readily accessible disconnect device shall be incorporated in the building  
installation wiring.  
2 Select and click on the manual that you want to read.  
This opens the PDF file of the manual.  
WARNING (for Installers only)  
Instructions for installing the equipment on the ceiling:  
After the installation, ensure the connection is capable of supporting five  
times the weight of the equipment downwards.  
Locations subject to strong vibration or shock  
Clicking an item in the Table of Contents allows you jump to the relevant  
page.  
Ventilation  
To prevent heat buildup, do not block air circulation around the camera.  
Notes  
The files may not be displayed properly, depending on the version of Adobe  
Reader. In this case, install the latest version, which you can download from  
the URL mentioned in “Preparationsabove.  
If you have lost or damaged the CD-ROM, you can purchase replacement.  
Contact your Sony service representative.  
Transportation  
CAUTION  
When transporting the camera, repack it as originally packed at the factory or in  
materials of equal quality.  
The rating label is located on the bottom.  
CAUTION for LAN port  
For safety reason, do not connect the LAN port to any network devices that  
might have excessive voltage.  
Cleaning  
Use a blower to remove dust from the lens.  
Use a soft, dry cloth to clean the external surfaces of the camera. Stubborn  
stains can be removed using a soft cloth dampened with a small quantity of  
detergent solution, then wipe dry.  
Do not use volatile solvents such as alcohol, benzene or thinners as they may  
damage the surface finishes.  
Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated in the  
United States and/or other countries.  
Power Supply  
Caution for U.S.A. and Canada  
The SNC-RX570N/RX550N/RX530N operates on 24V AC or 12V DC.  
The SNC-RX570N/RX550N/RX530N automatically detects the power.  
Location and Function of Part  
Front  
Note on laser beams  
Use a Class 2 power supply which is UL Listed (in the U.S.A.) or CSA-certified  
(in Canada).  
NETWORK indicator (green)  
Laser beams may damage a CCD. You are cautioned that the surface of a CCD  
should not be exposed to laser beam radiation in an environment where a laser  
beam device is used.  
The indicator lights up or flashes in green when the camera is connected to  
the network.  
The indicator goes off when the camera is not connected to the network.  
Memory Stick slot  
Caution for other countries  
The SNC-RX570N/RX570P/RX550N/RX550P/RX530N/RX530P operates on  
24V AC or 12V DC.  
The SNC-RX570N/RX570P/RX550N/RX550P/RX530N/RX530P automatically  
detects the power.  
Use a power supply rated 24 V AC or 12 V DC which meets the requirements  
for SELV (Safety Extra Low Voltage) and complies with Limited Power Source  
according to IEC 60950.  
Phenomena Specific to CCD Image Sensors  
The following phenomena that may appear in images are specific to CCD (Charge  
Coupled Device) image sensors. They do not indicate malfunctions.  
Insert a “Memory Stick(not supplied) into the slot.  
Note  
White flecks  
Insert the “Memory Stickwith its front side towards the bottom of the  
camera.  
PC card slot  
Although the CCD image sensors are produced with high-precision technologies,  
fine white flecks may be generated on the screen in rare cases, caused by cosmic  
rays, etc.  
For customers in the U.S.A. (SNC-RX570N/RX550N/RX530N only)  
This slot is used for the optional SNCA-CFW1/SNCA-CFW5* wireless card or  
recommended ATA memory card.  
In case of the wireless card: Insert the SNCA-CFW1 or SNCA-CFW5* into a  
commercially available type II-PCMCIA adaptor and insert the adaptor into  
the PC card slot.  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This is related to the principle of CCD image sensors and is not a malfunction.  
The white flecks especially tend to be seen in the following cases:  
- when operating at a high environmental temperature  
- when you have raised the gain (sensitivity)  
- when using the slow shutter  
In case of the recommended ATA memory card: Insert the “Memory Stick”  
into the optional PC card adapter and insert the adapter into the PC card slot.  
NOTE: This equipment has been tested and found to comply with the limits  
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
when the equipment is operated in a commercial environment. This  
equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instruction manual, may cause  
harmful interference to radio communications. Operation of this equipment  
in a residential area is likely to cause harmful interference in which case the  
user will be required to correct the interference at his own expense.  
Vertical smear  
When an extremely bright object, such as a strong spotlight or flashlight, is  
being shot, vertical tails may be produced on the screen, or the image may be  
distorted.  
Notes  
Insert the PC card with its front side towards the bottom of the camera.  
For the verified ATA memory cards, contact your authorized Sony dealer.  
PC card lever  
Press the lever to remove the PC card from the PC card slot.  
POWER indicator (green)  
When the power is supplied to the camera, the camera starts checking the  
system. If the system works normally, this indicator lights up.  
Lens  
Aliasing  
When fine patterns, stripes, or lines are shot, they may appear jagged or flicker.  
About a “Memory Stick”  
You are cautioned that any changes or modifications not expressly approved  
in this manual could void your authority to operate this equipment.  
Available types of “Memory Stick” for the unit  
You can use “Memory Stick,“MagicGate Memory Stickand “Memory Stick  
PROwith the unit. However, because the unit does not support the MagicGate  
standards, data recorded with the unit is not subject to MagicGate copyright  
protection.  
All interface cables used to connect peripherals must be shielded in order to  
comply with the limits for a digital device pursuant to Subpart B or Part 15 of  
FCC Rules.  
Note  
The four edges of an image may be dark depending on the zoom position.  
This is a phenomenon related to the structure of the camera, and does not  
cause a problem.  
For customers in Canada (SNC-RX570N/RX550N/RX530N only)  
This Class A digital apparatus complies with Canadian ICES-003.  
Note  
The data recorded with this unit is not compatible with the other units, even if  
they support “Memory Stick.”  
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du  
Canada.  
* SNCA-CFW5 is not available in some countries and areas. For details, contact your  
authorized Sony dealer.  
For the customers in Europe  
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-  
ku, Tokyo, Japan.  
What is MagicGate ?  
MagicGate is copyright protection technology that uses encryption technology.  
The Authorized Representative for EMC and product safety is Sony  
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.  
For any service or guarantee matters please refer to the addresses given in  
separate service or guarantee documents.  
For the customers in Europe, Australia and New Zealand  
WARNING  
This is a Class A product. In a domestic environment, this product may cause  
radio interference in which case the user may be required to take adequate  
measures.  
In the case that interference should occur, consult your nearest authorized  
Sony service facility.  
This apparatus shall not be used in the residential area.  
ATTENTION  
The electromagnetic fields at specific frequencies may influence the picture  
of the unit.  
For the customers in Taiwan only  
 

Sharp Computer Monitor PNA601 User Manual
Sony Camcorder Accessories CCD TRV37 User Manual
Sony Car Stereo System XR CA300 User Manual
Sony Car Video System NSR 1000 User Manual
Sony Musical Instrument SDP E300 User Manual
Sony Video Game Console 4 156 992 611 User Manual
SOYO Computer Hardware SY D6IBA User Manual
Spectra Clock Radio KT2053 User Manual
Sylvania Flat Panel Television LD320SS2 User Manual
Sylvania MP3 Player SMPK1066 User Manual